Atsf



Ok that's pretty interesting about the placard. Good spotting.
With pine oil and tank cars in mind, I looked at the tm:SFR again. It doesn't have a layer for ATSF industiries, but it does have the 1966 SPINS which includes a fair number of the ATSF industries in the joint switching areas. There was a Hexol, Inc. on 17th Street for which the 1966 SPINS spot instructions says '15, 16 tanks'. This industry was located in the 7 zone switched by both the SP and ATSF. Track 704. So ATSF served.
Googled Hexol Inc. and found the attached 1984 correspondence from the EPA. Important details are that Hexol manufactured a cleaning product called Pine-Kleen and were still at the 17th St. location. https://www3.epa.gov/pesticides/chem_search/ppls/001776-00009-19840501.pdf
Also attached a view of the 7 zone with Hexol's plant.
I actually stopped looking after this hit on Hexol. Maybe there are other industries that would have probably used pine oil and were still around in 1984?
Pine Kleen: https://procheminc.com/products/pine-kleen/
From https://archive.org/stream/federal-register-1976-12-21/FR-1976-12-21_djvu.txtFEDERAL REGISTER, VOL 41, NO 246—TUESDAY, DECEMBER 21, 1976
55572 NOTICES
EPA File Symbol 1776-0. Hexol, Inc., 1500 17th
St., San Francisco CA 94107. PINE KLEEN.
Active Ingredients: Pine oil 30.0%; Iso¬
propyl alcohol 12.0%; Soap 10.8%; 4&6-
chioro-2-phenylphenol 0.1%. Method of
Support: Application proceeds under 2(a)
of Interim policy. PM32
Edited 2 time(s). Last edit at 12/26/20 22:10 by phthithu.

  1. Atsf Railroad
  2. Atsf B40-8w
  3. Atsf 3415
  4. Atsf All Time Diesel Roster

The Atchison, Topeka, and Santa Fe Railway (AT&SF), more often simply referred to as the “Santa Fe Railroad,” was first chartered by the Kansas Territorial Legislature in February 1859 and called the Atchison-Topeka Railroad. The Atchison & Topeka Company was organized on February 11 of that year.

(Redirected from ATSF 1)
EMC 1800 hp B-B locomotives
Postcard of the Santa Fe's No. 1 locomotive after rebuild
Type and origin
Power typeDiesel-electric
BuilderElectro-Motive Corporation
Model1935
Total produced5
Specifications
Configuration:
• AARB-B
Prime moverWinton 201-A (two)
Engine type
Cylinders12
Performance figures
Power output1,800 hp (1.34 MW)
Career
LocaleNorth America
DispositionOne preserved, remainder scrapped
  1. The 92 had been renumbered from 101 when the ATSF GP60’s were introduced in the 100 series. Also in 2010, it was decided to try to use the 92 as a control cab, basically use it as a lead loco with a unit MU’ed to provide the propulsion power. The air brake system and electrical control system was gone through in detail, along with the.
  2. ATSF #72312 was used by the Santa Fe to haul all types of bulky and odd-shaped miscellaneous materials for over 21 years. Heavily worn, torn, battered, and badly dented, it was retired and donated to the PSRMA in September 1979 by the Santa Fe Railway.

Electro-Motive Corporation (later Electro-Motive Division, General Motors) produced five 1800 hp B-B experimental passenger train-hauling diesel locomotives in 1935; two company-owned demonstrators, #511 and #512, the Baltimore and Ohio Railroad's #50, and two units for the Atchison, Topeka and Santa Fe Railway, Diesel Locomotive #1. The twin engine power unit layout and multiple unit control systems developed with the B-B locomotives were soon adopted for other locomotives such as the Burlington Route's Zephyr locomotives built by the Budd Company in 1936 and EMC's own EMD E-units introduced in 1937. The B-B locomotives worked as proof-of-concept demonstrators for diesel power with the service loads of full size trains, breaking out of its niche powering the smaller custom Streamliners.

In 1935 EMC was starting its transition from a design and marketing company to a locomotive building company; development of regular production model locomotives was occurring before they had the capability to build locomotives. Construction of carbodies for EMC demonstrators #511 and #512, and B&O #50 was contracted to General Electric's Erie, Pennsylvania works, and AT&SF #1 was contracted to St. Louis Car Company. Like most boxcabs, they initially had control cabs at both ends, a feature that would only rarely be repeated in future North American locomotives, although it would become common elsewhere. Power was provided by twin 900 hp (670 kW) 12 cylinder Winton 201-A diesel engines in each power unit, exceeding by 50% the most power that could be attained with a single engine at that time. The added 'headroom' in power extended the life of mechanical parts, which was a critical issue with early diesel engines in locomotives. The units were built with AAR type B two-axle trucks. As development design locomotives, modifications were frequently made to them to overcome various teething problems; the EMC demonstrators spent considerable time in aluminum paint substituting for the units under modification.[1]

EMC demonstrators 511 and 512[edit]

EMC Demonstrators
EMC demonstrator #511 on the Chicago, Burlington and Quincy Railroad in 1937. The locomotive is painted silver, to serve as a backup for CB&Q's Zephyr and AT&SF's Super Chief locomotives.
Type and origin
Power typeDiesel-electric
BuilderGeneral Electric (EMC design)
Serial number511–512
Build dateAugust 1935
Total produced2
Specifications
Career
Numbers511–512
Official name1800 hp B-B
LocaleNorth America
DispositionScrapped

The two EMC demonstrators, numbered 511 and 512, were built in August 1935 to demonstrate the future of passenger diesel power to potential customers. The boxy bodywork was not what EMC intended to sell, but it was an easy way to demonstrate the power units and hauling capacity, which would not be changed in the future E-units.

They were demonstrated both together and singly; the latter for shorter trains for local and less busy services, the former to replace larger steam locomotives on heavier trains. These units were highly significant in pioneering multiple unit connections which could be quickly connected and disconnected in the field, allowing units to be 'lashed up' into more powerful combinations (operated by a single crew) at will, and allowing malfunctioning units to be replaced with fresh units with ease.

EMC #512, painted silver, was added to the ATSF locomotive #1 cab/booster pair to help pull the first regular run of the streamlined, Budd Company-built Super Chief on May 18, 1937, after the EMC E1 pair 2/2A built for the train burned out some of their traction motors on a record-breaking exhibition run days before.

In 1938, having outlived their usefulness, the two demonstrators were scrapped. Trucks and some other components were re-used for the two EMC NW4switchers built for the Missouri Pacific Railroad.

Baltimore & Ohio 50[edit]

Baltimore & Ohio #50
In 1972 at the EMD plant for EMC/EMD's 50th anniversary celebration.
Type and origin
Power typeDiesel-electric
BuilderGeneral Electric (EMC design)
Serial number532
Build dateAugust 1935
Total produced1
Specifications
Career
OperatorsBaltimore and Ohio Railroad
Chicago and Alton Railroad
Gulf, Mobile and Ohio Railroad
NumbersB&O 50
C&A 50
GM&O 1200
Official name1800 hp B-B
LocaleNorth America
Current ownerMuseum of Transportation, St. Louis, Missouri
DispositionMuseum artifact

Baltimore and Ohio Railroad #50 was fundamentally identical to demonstrators 511 and 512 when delivered. In this form, it hauled the first Diesel-powered Royal Blue until the introduction of the EMC EA/EB units in 1937.[2]

Following that, it had a semi-streamlined 'shovel nose' applied to one end, and transferred to the B&O-owned Chicago and Alton Railroad to haul the Abraham Lincoln. When the Alton left B&O control in the merger that created the Gulf, Mobile and Ohio Railroad, #50 entered the GM&O roster as #1200. After the 2nd world war, the shovel-nose treatment was removed, restoring the unit to its prior boxcab appearance. The locomotive was placed into local freight and passenger service until it was retired, upon which it was donated to the Museum of Transportation, St. Louis, Missouri, where it remains.

Santa Fe 1[edit]

AT&SF 1
The two units of Atchison, Topeka and Santa Fe Railway Diesel locomotive #1, photographed in Chicago on August 31, 1935.
Type and origin
Power typeDiesel-electric
BuilderSt. Louis Car Company (EMC design)
Serial number535–536
Build dateAugust 1935
Total produced2
Specifications
Career
OperatorsAtchison, Topeka and Santa Fe Railway
Numbers1
Official name1800 hp B-B
NicknamesAmos and Andy
LocaleNorth America
Scrapped1953
Dispositionscrapped

Atchison, Topeka and Santa Fe Railway#1 was a twin-unit set built by St. Louis Car Company in August 1935 to haul the Santa Fe's new train, the Super Chief, for its first year of operation from May 12, 1936 until May 18 of the following year.[3]

The Santa Fe Railway was an ideal railroad to be a dieselization pioneer; its long desert runs in the Southwest made the provision of water supplies for steam locomotives problematic. Santa Fe saw the potential for rapid dieselization of its southwestern passenger service so the railroad asked for two locomotives like the EMC demonstrators as proof of concept, letting the railroad gain some experience with diesel operation before production model diesel locomotives and the lightweight, streamlined trains they would haul were ready. The 2226.6 mile route that these units were intended to run, covering mountain and desert, was completely unprecedented, and exposed weaknesses in the design. Their working up period extended for about eight months before they were introduced into service, during which time modifications were continually made to them.

Santa Fe asked for some cosmetic 'dressing up' of the locomotives, since they would be hauling a prestige passenger train, and EMC obliged with a treatment by Sterling McDonald's GM styling department, which included large hooded air intakes at the front of the units and a striking paint scheme: Olive Green with Cobalt Blue and Sarasota Blue stripes separated by pinstripes of Crimson and Tuscan Red. This livery reduced the boxiness of the locomotives and gave them more of a look of speed.

Atsf passenger trains

The units were delivered with shrouding around their trucks, which was soon removed because the bearings on the trucks tended to run hot.Engine cooling was another problem that needed to be addressed during the testing period. The second unit in particular had trouble getting enough air to cool the radiators; likely the stylish hood over the air intake contributed to this problem. A number of vents were added to the roofs in their first year of existence. Both units required larger steam generators, and a greater fuel and water supply.

Atsf

Because they were always run coupled together, Santa Fe employees nicknamed the two units the 'One Spot Twins' and 'Amos & Andy' (after the popular radio situation comedy). Both units shared a common road number and the operating department considered them a single locomotive. The mechanical department referred to them as Unit A (lead unit) and Unit B (trailing unit). While the pair substituted for a Super Chief E1 set with burned-out traction motors in 1937, the company leased EMC demonstrator #512 as a third unit called Unit C.

After new EMC E1s replaced the proof-of-concept #1 in 1937, the Santa Fe began to further modify the two locomotive units. The two units were rebuilt as single-ended locomotives in 1938 with a 'bulldog' front end — a very high, raised cab above a rounded snub nose. The locomotives were painted in the Warbonnet paint scheme similar to the E1s. The trucks were replaced with three axle drop-equalizer trucks of unusual AAR wheel arrangement 1B configuration; the lead axle was unpowered, while the two rear axles were powered. The three-axle trucks were more stable at speed and lighter on the track with a lower axle loading. Roller bearings on the new trucks alleviated the overheating problem. Unit A retained road number 1 and Unit B was renumbered number 10, since it was now regarded as a separate locomotive.[4] The revamped locomotives pulled the new Chicagoan (ATSF train) and Kansas Cityan named trainsets between Chicago and Wichita, KS, with the run soon extended to Oklahoma City.

In 1941 No. 10 had its cab removed, and became a booster unit numbered 1A. In 1948, AT&SF rebuilt unit 1A into freight transfer locomotive No. 2611 running on EMD Blomberg B trucks; locomotive 1 remained unmodified from its 1938 rebuild as a passenger unit.[5]

Atsf Railroad

Both 1 and 2611 went to Electro-Motive Diesel as trade-ins on EMD E8 locomotives in 1953. Both emerged as booster units, numbered 83A and 84A, respectively.

Notes[edit]

  1. ^Iron Horses of the Santa Fe Trail, E.D. Worley, Southwest Railroad Historical Society, 1965, L of C 75-39813
  2. ^Mann, Charles F.A. (17 September 1935). 'Most Powerful Diesel Ready for Rail Service'. The Meriden Daily Journal. Retrieved 28 March 2012.
  3. ^Reed 1975, p. 104
  4. ^Reed 1975, p. 109
  5. ^'Archived copy'. Archived from the original on 2011-07-22. Retrieved 2010-01-21.CS1 maint: archived copy as title (link)

Atsf B40-8w

Trains

References[edit]

  • Brasher, Larry E. (2001). The One-Spot Twins. Midwest City, OK: Santa Fe Railway Historical & Modeling Society. ISBN0-9713320-0-2.
  • Pinkepank, Jerry A. (1973). The Second Diesel Spotter's Guide. Milwaukee, WI: Kalmbach Publishing Co. ISBN0-89024-026-4.
  • Reed, Robert C. (1975). The Streamline Era. San Marino, California: Golden West Books. ISBN0-87095-053-3.CS1 maint: ref=harv (link)
  • Repp, Stan (1980). Super Chief: Train of the Stars. San Marino, CA: Golden West Books. ISBN0-87095-081-9.

External links[edit]

Atsf 3415

  • Media related to EMC 1800 hp B-B locomotives at Wikimedia Commons

Atsf All Time Diesel Roster

Retrieved from 'https://en.wikipedia.org/w/index.php?title=EMC_1800_hp_B-B&oldid=952586697#Santa_Fe_1'